![]() ![]() If you are using the current Camtasia, beware as camtasia seems to automatically select 22,050 hz as the default sampling rate. You dont have to have it set as the default device since you can choose which to use in camtasia, but it does save a little time in the setup. Again set up a send on the master bus to the digital output, then set the default device in the control panel. ![]() You then set the drivers to use inputs 1 & 2 to be used within windows as the recording device (done through the control panel sound section).Īnother option is to use digital outputs and run those outputs to the digital inputs of the realtek onboard (dont use the analoge, Ive found them to be very noisy). ![]() run outputs 3 & 4, to inputs 1 & 2, and create a send on the master fader to outputs 3 and 4. If the motu driver allows you to set which inputs and outputs it uses within windows, you can run cable between a pair of outputs into an input. Im not familiar with the motu driver so some of this might not work. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |